Sony KLV KLV-S32A10E Operating Instructions Manual page 37

Problem
No colour on programmes
No colour or irregular colour
when viewing a signal from the
Y, PB/CB, PR/CR jacks of
3
Sound
Problem
No sound, but good picture
Noisy sound
General
Problem
The TV turns off automatically
(the TV enters standby mode)
Some input sources cannot be
selected
The remote does not function
Wrong characters appear
when viewing the menu/Text
Cause/Remedy
• Select "Reset" in the "Picture Adjustment" menu to return to the factory
settings (page 19).
• Check the connection of the Y, P
• Make sure that the Y, P
B
respective sockets.
Cause/Remedy
• Press 2 +/– or % (Mute).
• Check that "TV Speakers" is set to "on" in the "Features" menu (page 24).
• See the "Picture noise" causes/remedies on page 36.
Cause/Remedy
• If no signal is received or no operation is performed in the TV mode for 10
minutes, the TV automatically switches to standby mode.
• Select "AV Preset" in the "Set Up" menu and cancel "Skip" of the input
source (page 28).
• Replace the batteries.
• Select "Language" and "Country" in the "Set Up" menu and set the
language and country/region in which Text is provided (page 26). For
Cyrillic languages, we recommended that you select Russia if your own
country/region does not appear in the list.
/C , P /C jacks of
B B R R
/C , P /C jacks of 3 are firmly seated in their
B R R
3.
Continued
37
GB