Symbologies; Message Length Description; 1-D Symbologies; Enable/Disable All 1-D Symbologies - Honeywell HF800 Series Reference Manual

Symbologies

The reader will be configurable such that the reading of each symbol type can
be enabled or disabled individually, and features appropriate to specific symbol types
can be controlled.
HF800 can choose to support the following symbologies:
Aztec Code, Codabar, Codablock A, Codablock F, Code 11, Code 128, Code 39,
Code 93, Data Matrix, EAN/JAN-13, EAN/JAN 8, Interleaved 2 of 5, Matrix 2 of 5,
MaxiCode, MicroPDF, PDF417, MSI, QR Code, RSS Expanded, RSS Limited, RSS-
14, UPC-A, UPC E, Chinese Sensible(Han Xin) code, Maxicode, DPM code.
Note: For the configuration of single symbology or multiple symbologies of them,
please go to the specific part in this chapter.

Message Length Description

Some of the barcode symbologies may need to set the valid reading length. If the
data length of the scanned barcode doesn't match the valid reading length, the
reader will issue an error tone. You may wish to set the same value for minimum and
maximum length to force the reader to read fixed length barcode data.
This helps to reduce the chances of a misread.
EXAMPLE: Decode only those barcodes with a count of 9-20 characters.
Min length = 09, Max length = 20
EXAMPLE: Decode only those barcodes with a count of 15 characters.
Min length = 15, Max length = 15
The minimum and maximum lengths and the defaults are included with the
respective symbologies and they can be configured through DataMax
Program separately.

1-D symbologies

Enable/Disable all 1-D symbologies

®
Open DataMax Configuration Program and connect the device first.
Go to the tab page "Symbologies" and click the "Linear" sub page.
Check the check box "Check All" will enable all the 1-D symbologies present in the
list.
Uncheck it will disable all the 1-D symbologies present in the list.
®
Configuration
49