Connecting The Tv; Cable System Or Vhf/Uhf Antenna System; Cable System And Vhf/Uhf Antenna System; Hd Cable Box/Hd Satellite Box - Sony Bravia KDL-40XBR4 Operating Instructions Manual

3. Connecting the TV

Cable System or VHF/UHF Antenna
System
You can enjoy high-definition and standard-
definition digital programming (if available in
your area) along with standard-definition analog
programming.
~
• This TV is capable of receiving unscrambled digital
programming for both cable (QAM and 8VSB) and
external VHF/UHF antenna (ATSC).
• It is strongly recommended that you connect the
antenna/cable input using the 75-ohm coaxial cable
(not supplied) to receive optimum picture quality. A
300-ohm twin lead cable can be easily affected by
radio frequency interference, resulting in signal
degradation.
Cable or VHF/UHF (or VHF only)
75-ohm coaxial
cable
Cable System and VHF/UHF Antenna
System
Use an optional A-B RF switch (not supplied) to
switch between the cable and over-the-air antenna
programming, as indicated below.
A-B RF switch
A
Cable
B
Antenna
~
• Be sure to set the Cable setting to On or Off in the
Channel settings for the type of input signal you
choose (see page 40).
14
Rear of TV
VHF/UHF/CABLE input
Rear of TV
VHF/UHF/CABLE input

HD Cable Box/HD Satellite Box

You can also enjoy high-definition programming
by subscribing to a high-definition cable service or
a high-definition satellite service. For the best
possible picture, make sure you connect this
equipment to your TV via the HDMI or
component video (with audio) input on the back of
your TV.
Shown with HDMI Connection
Rear of TV
1
L
AUDIO
AUDIO
R
HDMI cable
HD cable box/
HD satellite box
IN IN
3 3
CATV/Satellite
antenna cable