Nespresso Citiz Service Manual page 65

• Loosen 4 screws (41, oval shaped head) at the bottom side of platform.
For complete removal of the core unit proceed as follows:
• Remove water tank connector (53) from platform (see page 59).
• Remove insulated faston receptacle of phase wire (15) from mains switch (54).
• Disconnect adapter plug (15) of neutral wire.
• If present, disconnect ground wire (15, part of thermoblock assembly).
R E P A I R S
Citiz service manual
After this repair step
the core unit can be
pulled out of the plat­
form slightly (with still con­
nected hoses and wires).
Now the covers of the core
unit can be removed.
The hoses can
remain on the water
tank connector.
Use a pair of flat pliers
to pull off insulating
sleeve with recepta­
cle.
The flat receptacle on
the ground wire has a
special connector
latching (see detail). Press
down lever at first, then pull
off receptacle.
65