Sony Grand Wega KF-50SX300K Operating Instructions Manual page 14

v
Auto Volume Press or
independent of the broadcast signal, e.g. in the case of advertisements) or Off (the
volume level changes according to the broadcast signal). Next press OK to store.
If you select "Dolby Virtual" on the "Sound Effect" option, the "Auto Volume" option will
automatically be switched to "Off" and vice versa.
TV Speakers This option allows you to select if you want to listen the TV from the TV speakers
or from an external amplifier connected to the audio outputs on the rear of the TV.
After selecting this option, press OK. Next press repeatedly
On
One time off
Permanent off (to always listen to the TV from external amplifier).
Once you have selected your desired option, press OK to store.
If you have selected "One time off" or "Permanent off", the volume of the external equipment
can also be altered by pressing the 2 +/- buttons of the remote control. When the volume
buttons are pressed, the symbol
not the volume of the TV set speakers, it is from the external equipment.
Headphones Set Up This option allows you to customise the headphones volume and the
PAP settings (refer to page 21 for details on PAP).
After selecting this option press OK. Next press repeatedly
v
* The "BBE High Definition Sound system" is manufactured by Sony Corporation under
license from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No.
4,482,866. The word "BBE" and BBE Symbol are trademarks of BBE Sound, Inc.
**This TV has been designed to create surround sound effect by simulating the sound of four
speakers with two speakers, when the broadcast audio signal is Dolby Surround encoded.
The sound effect can also be improved by connecting a suitable external amplifier (for
details refer to page 25).
** Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories.
V
to select On (the volume level of the channels will stay the same,
(to listen the TV from the TV set speakers).
(to listen to the TV from the external amplifier only one
time. By using this option, any time the TV is turned
off/on, it returns to the default setting "On").
%
will appear indicating that the volume you are altering is
V
or to select:
B
volume Press or
from the headphones.
Dual Sound • For a Stereo broadcast:
v
Press
• For a bilingual broadcast:
v
Press
available), A (for channel 1) or B (for channel 2).
PAP Sound Select Frame if you want to listen to
the active screen (framed) of the PAP screen (see page
21), select Left picture if you want to listen to the left
screen or select Right picture if you want to listen to
the right screen.
v
or
b
to decrease or increase the volume level
V
or to select Stereo or Mono
V
or to select Mono (for mono channel if
TV Functions
V
to select:
GB
15