Av Preset; Manual Programme Preset (Analogue Mode Only) - Sony BRAVIA KDL-W40A11E Operating Instructions Manual

AV Preset

Assigns a name to any equipment connected to the side and rear sockets. The name will be
displayed briefly on the screen when the equipment is selected. You can skip an input source
that is not connected to any equipment.
1
Press OK to select "AV Preset".
2
Press M/m to select the desired input source, then press OK.
3
Press M/m to select the desired option below, then press OK.

Manual Programme Preset (Analogue mode only)

Before selecting "Label"/"AFT"/"Audio Filter"/"Skip"/"Decoder"/"ATT", press PROG +/-
to select the programme number with the channel. You cannot select a programme number
that is set to skip (page 35).
1
Press OK to select "Manual Programme Preset".
2
Press M/m to select one of the following options, then press OK.
Option Description
Equipment Uses one of the preset labels to assign a name to connected
labels equipment.
Edit
Creates your own label. Follow steps 3 to 5 of "Programme Labels"
(page 32).
Skip Skips an input source that is not connected to any equipment when
you press M/m to select the input source.
Continued
33
GB