Screen Control Menu; Auto Format; Screen Shift - Sony BRAVIA KDL-V32A11E Operating Instructions Manual

Screen Control menu

Auto Format

Automatically changes the screen format according to the broadcast signal.
1
2
Screen Format
For details about the screen format, see page 17.
1
2

Screen Shift

Adjusts the position of the picture for each screen format.
1
2
3
Press OK to select "Auto Format".
Press M/m to select "On", then press OK.
To keep your setting, select "Off".
Tips
• Even if you have selected "On" or "Off" in "Auto Format", you can always modify the format of
the screen by pressing
• "Auto Format" is available for PAL and SECAM signals only.
Press OK to select "Screen Format".
Press M/m to select "Smart", "4:3", "14:9", "Zoom" or "Wide" (see page
17 for details), then press OK.
Press OK to select "Screen Shift".
Press M/m to select one of the following, then press OK.
V Shift: Adjusts the vertical picture position.
H Shift: Adjusts the horizontal picture position.
Reset: Resets to the factory settings. Instead of step 3, press M/m to select "OK", then
press OK.
Press M/m (for vertical picture position) or </, (for horizontal picture
position), then press OK.
Tip
When "Screen Format" is set to "4:3" or "Wide", "V Shift" cannot be adjusted.
You can select the options listed below on the Screen
Control menu. To select options, see "Navigating
through menus" (page 21).
repeatedly.
27
GB