Names Of Parts; Input Channel Section - Zoom LiveTrak L-20R Quick Manual

Names of parts

Front

Input channel section

Hi-Z switch
Hi-Z switch
Use to switch the input impedance of MIC/LINE input jack 1 (or 2).
48V switch/indicator
This turns 48 V phantom power on or off.
PAD switch
This attenuates (reduces) the input signal of the equipment connected to MIC/LINE input jacks 3–16 by 26 dB.
SIG indicator
This shows the signal level after adjustment by the GAIN knob.
The indicator color changes according to the signal level. Adjust so that it does not light red.
Lit red: Input signal level is close (−3 dBFS or higher) to the clipping level (0 dBFS)
Lit green: Input signal level is between −48 dBFS and −3 dBFS compared to the clipping level (0 dBFS)
GAIN knob
Use to adjust the input gain of the mic preamp.
COMP knob
Use to adjust the amount of compression.
Input channel section
Monitoring section
48V switch/indicator
4
Display section
PAD switch
SIG indicator
GAIN knob
COMP knob