Sony SLV-D360P Operating Instructions (For SLV-D360P DVD Player) Operating Instructions Manual page 63

B Use this hookup if your A/V receiver has a Dolby Digital or DTS*
decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital or DTS decoder function of
your AV amplifier (receiver). You are not able to enjoy the surround sound effects of
this player. You must make connections using
∗ "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
1
to LINE OUT L/R (AUDIO)
l : Signal flow
to audio input
[Speakers]
Rear (L) Subwoofer
Rear (R)
Note
• After you have completed the connection, be sure to set "Dolby Digital" to "Dolby Digital"
and "DTS" to "On" in "AUDIO SETUP" menu (page 66). Otherwise, no sound or a loud
noise will come from the speakers.
DVD-VCR
Stereo audio
(red)
cord (not
supplied)
and
(white)
(red)
(white)
AV amplifier (receiver) having
a decoder
and .
B-1 B-2
Coaxial digital
cord (not supplied)
or
to DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical
digital input
[Speakers]
Front (L) Center
Front (R)
A/V Receiver hookup
63