Step 5 : Setting The Clock - Sony SLV-D360P Operating Instructions (For SLV-D360P DVD Player) Operating Instructions Manual

Step 5 : Setting the clock

Using the Auto Clock Set
feature
Some TV and cable channels transmit time
signals with their broadcasts. Your DVD-
VCR can pick up this time signal to
automatically set the clock.
The Auto Clock Set feature works only if a
channel in your area is broadcasting a time
signal. If broadcasters in your area are not
yet sending time signals, set the time
manually (page 24).
Before you start...
• Turn on the DVD-VCR and your TV.
When using a cable box, turn it on.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 10).
• Set the "RF Output Channel" to "3CH" or
"4CH" in "OPTION SETUP" menu
(page 110). If your TV is connected to the
DVD-VCR using A/V connections, set the
TV to video input.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1
2
22
Setting the clock
Press SET UP, then press V/v to select
(OPTION) and press ENTER.
Press V/v to select "Clock Set/Adjust", then
press ENTER.
The "CLOCK SET/ADJUST" menu appears.
SET UP
V/v/B/b
ENTER
O RETURN
OPTION SETUP
Language :English
Clock Set/Adjust
Channel Setup
[ Off ]
Auto Power Off
RF Output Channel [ 3CH ]
V v
ENTER RETURN SET UP
CLOCK SET/ADJUST
Auto
Manual
V v
RETURN SET UP
ENTER