Tuning - Sony RDR-HXD710 Operating Instructions Manual

Lock Channels
Programme Service
001 DDE News
002 AAC
003 NCE 5
004 Channel J
005 Digital Teletext
Page Up Page Down
If you do not wish to lock one of the five
channels in the display, press the RED or
GREEN button to view the previous or next
five channels available.
3
Press the button to come back to the
O
Parental Lock menu.
◆To unlock channels
1
In Step 2 above press the M/m buttons to
highlight the channel you want to unlock, then
press ENTER: the
programme number disappears.
2
Press the button to come back to the
O
Parental Lock menu.
z Hints
• Press the BLUE button to view the list showing only
the locked channels.
• Press the BLUE button once again when you wish to
return to the previous channel list display.
• Press / while the Lock Channels display is
turned on to change to the previous/next page.
◆ To set the Age Limit
1
Once the Parental Lock menu displayed,
select "Set Age Limit," and press ENTER.
Set Age Limit
An event will be locked when it is rated as
unsuitable for children below the following age:
Age:
2
Press the M/m buttons to set the desired age
limit and press ENTER.
b
Notes
• To operate correctly, this feature relies on the
broadcaster sending the correct age classification for
each programme.
• If you select the Parental Lock channel activated, "This
channel has been locked" appears on the gray screen
and it is recorded.
Show Locked
icon next to the

Tuning

The Tuning Display allows you to tune your
recorder automatically or to hide unused or
unwanted programmes and also change the order
of the programmes on display. During these
procedures you may be requested to enter your
password. Refer to page 90 for information.
Follow steps 1 to 3 of "Digital TV settings
(DTV Settings)" on page 90, then select
"Tuning," and press ENTER.
The DTV Settings - Tuning menu appears.
Tuning
Auto Tune
Programme Hide
Programme Sort
Auto Tune
This option enables you to capture and store
automatically all available channels.
1
Once the DTV Settings - Tuning menu
displayed, select "Auto Tune," and press
ENTER.
The Auto Tune Start Display appears.
Auto Tune
Do you want to start auto tuning ?
Yes
2
Select "Yes" in the menu option and press
ENTER.
The Auto Tune display appears showing a
tuning progress bar and the number of
channels found.
Auto Tune
Number of channels found:
Searching ...
No
32
,continued 91