About The Smartlink Features (For Scart Connections Only) - Sony RDR-GX120 Operating Instructions Manual

When playing "wide screen" images
Some recorded images may not fit your TV
screen. To change the picture size, see
page 61.
If you are connecting to a VCR
Connect your VCR to the LINE 3/
DECODER jack on the recorder (page 19).
b
Notes
• Do not connect more than one type of video cord
between the recorder and your TV at the same
time.
• When you connect the recorder to your TV via the
SCART jacks, the TV's input source is set to the
recorder automatically when you start playback.
If necessary, press TV t to return the input to
the TV.
• For correct SMARTLINK connection, you will
need a SCART cord that has the full 21 pins.
Refer to your TV's instruction manual as well for
this connection.
• If you connect this recorder to a TV with
SMARTLINK, set "Easy Setup - Line1 Output"
to "Video."
About the SMARTLINK
features (for SCART
connections only)
If the connected TV (or other connected
equipment such as a set top box) complies
with SMARTLINK, NexTView Link
*1
MEGALOGIC
CINEMALINK
*4
LINK , or T-V LINK
following SMARTLINK features.
• Preset Download
You can download the tuner preset data
from your TV to this recorder, and tune the
recorder according to that data in "Easy
Setup." This greatly simplifies the "Easy
Setup" procedure. Be careful not to
disconnect the cables or exit the "Easy
Setup" function during this procedure
(page 18).
• TV Direct Rec
You can easily record what you are
watching on your TV (page 27).
• One Touch Play
You can turn on the recorder and TV, set the
TV's input to the recorder, and start
playback with one touch of the H (play)
button (page 47).
12
*2
, EASYLINK ,
*2 *3
, Q-Link , EURO VIEW
*5
, you can enjoy the
• One Touch Menu
You can turn on the recorder and TV, set the
TV to the recorder's programme position,
and display the Title List menu with one
touch of the TITLE LIST button (page 47).
• One Touch Timer
You can turn on the recorder and TV, set the
TV to the recorder's programme position,
and display the timer programming menu
with one touch of the TIMER button
(page 39).
• Automatic Power Off
The recorder will turn off automatically if
the recorder is not used after you turn off
the TV.
• NexTView Download
You can easily set the timer by using the
NexTView Download function on your TV.
See your TV's instruction manual.
*1
"MEGALOGIC" is a registered trademark of
Grundig Corporation.
*2
"EASYLINK" and "CINEMALINK" are
trademarks of Philips Corporation.
*3
"Q-Link" and "NexTView Link" are trademarks
of Panasonic Corporation.
*4
"EURO VIEW LINK" is a trademark of Toshiba
Corporation.
*5
"T-V LINK" is a trademark of JVC Corporation.
z Hint
SMARTLINK also works with TVs or other
equipment having EPG Timer Control, EPG Title
*3 Download, and Now Recording functions. For
,
details, refer to the operating instructions supplied
with your TV or other equipment.
b
Notes
• The SMARTLINK features are available only
when "Video" is selected in "Line1 Output."
• The SMARTLINK features are not available
while the power is off when "Power save
standby" is set to "On" (page 69).
• Not all TVs respond to the functions above.