System Requirements - Sony DRX-820UL-T Operating Instructions Manual

System
Requirements
The drive should be used with a system that
meets the following requirements
Windows
❑ PC/AT-compatible computer
❑ CPU: Pentium III, 800 MHz or higher
(with Nero Vision Express: Pentium 4,
1.6 GHz recommended)
❑ RAM: 256 MB or higher
❑ 1 GB (with Nero Vision Express:
10 GB) free hard disk space
❑ Operating system:
Windows 2000 Professional
(referred to as Windows 2000),
Windows XP Home Edition or
Windows XP Professional
(referred to as Windows XP)
❑ i.LINK or USB connector
Macintosh
❑ A Power Macintosh G3 or later capable
of running Mac OS X 10.2 or later
❑ RAM: 256 MB or more
❑ 200 MB or more available hard disk
space
❑ Operating system: Mac OS X 10.2 or
later
❑ FireWire or USB connector
1)
The above requirements are the minimum
necessary requirements to write to disc
normally. Under actual operating conditions,
the requirements imposed by your software
must also be met. For details, refer to your
software documentation.
Notes
• These operating instructions include IEEE1394
and FireWire in the expression i.LINK.
• You must use discs that are compatible with the
write speed you have selected.
• Writing speed may automatically be adjusted
1)
.
depending on the disc, specified disc speed, or
disc conditions such as weight imbalance and
eccentricity.
• System should meet following requirements in
order to use USB 2.0 operation with this device.
− Hi-Speed USB (USB 2.0-compliant)
interface cable (included).
− System equipped with a Hi-Speed USB (USB
2.0-compliant) connector or PCI adapter
card, and running the USB 2.0 EHCI device
driver
1)
• When connected to a product that does not
support Hi-Speed USB, the maximum transfer
rate is limited to 12 Mbps (equivalent to a USB
1.1 transfer rate).
• For a Macintosh, depending on the
specifications of your computer, you may not be
able to achieve the proper read/write speeds
because the USB transfer rate is limited.
• You cannot use the i.LINK and USB interfaces
simultaneously.
1)
.
The USB 2.0 EHCI driver software is
supplied with currently available PCI
adapter cards that conform to USB 2.0.
You can also use the USB 2.0 EHCI driver
software supplied with Windows 2000 SP4
and Windows XP SP1.
For details, contact your USB 2.0 adapter
dealer or consult the Microsoft
Corporation Web site.
7