Bluetooth Status Indications; Installing The Microphone; Pairing; Searching From This Unit - Sony XNV-L66BT Operating Instructions Manual

For details on the compatibility of your device,
visit the support site.
Support site
http://support.sony-europe.com/

Bluetooth status indications

XNV-L77BT/770BT
Bluetooth signal indicator*
XNV-L66BT/660BT
Bluetooth signal indicator*
* Lights up when the Bluetooth signal is on.
ATT
Calling...
Name
0123456789
Bluetooth status indications
None: Bluetooth signal is off.
Lit: Bluetooth signal is on.
None: No device is connected for
audio streaming.
Flashing: Connection is in progress.
Lit: A device is connected.
None: No cellular phone is connected
for handsfree calling.
Flashing: Connection is in progress.
Lit: A cellular phone is connected.
Indicates the signal strength status of
38
the connected cellular phone.
Calling...
Indicates the remaining battery status
of the connected cellular phone.

Installing the microphone

To capture your voice during handsfree calling,
you need to install the microphone (supplied).
For details on how to connect the microphone,
refer to the supplied "Installation/Connections"
guide.

Pairing

Pairing is required only the first time you connect
to a Bluetooth device (cellular phone, etc.).*
To pair this unit to a Bluetooth device, you need
to enter the same passkey*
the Bluetooth device. The passkey can be either
your own selected number or the number
determined by the Bluetooth device. For details,
refer to the manual of the Bluetooth device.
*1 If you delete the device registration from this unit,
you need to perform pairing again.
*2 Passkey may be called "passcode," "PIN code,"
"PIN number," "password," etc., depending on the
Bluetooth device.
Tip
You can pair up to 9 devices.

Searching from this unit

Check that the other Bluetooth device is
discoverable (set to allow for searching)
beforehand.
1
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch "BT Phone" in the top menu.
To select Bluetooth Audio, touch "Source
List," then "BT Audio."
2
Touch "BT Menu."
In the case of Bluetooth Audio, touch "Play
Menu," then "BT Menu."
The Bluetooth setting menu appears.
Back ATT
BT Menu
Signal OFF
Discoverable Hide
Device Name
Search
Device List
1
2 on this unit and on
Top
/ ON
/ Show
1/2