Using The Channel Menu - Sony WEGA KV-27FS100L Operating Instructions Manual

Using the Channel
To access the Channel menu, use the following steps:
To Display To Highlight
Press f to highlight an option; then press
Favorite 1
Channels
Quick access
2
to favorite
channels
3
4
✍
To use Favorite Channels, exit all menus and press
desired channel number and press
Use the
Cable
select it.
On:
Off:
✍
After changing your cable settings, you will need to perform Auto Program. See "To perform Auto
Program again" on page 19.
Use the
Channel Fix
to select it.
Off:
2-6:
Video 1:
✍
You cannot use Favorite Channels, Cable, Channel Skip/Add, or Channel Label when Channel Fix is set.
Menu
To Select
.
Use the F or f buttons to highlight the position (1-5) where you want to set a
favorite channel, then press
Use the F or f buttons to find the channel you want to add to your favorite
channels.
Press to select the channel. The TV will automatically change to the
selected channel.
Press G to return to the Channel menu or press
.
F or f buttons to highlight one of the following options, then press
Select if you are receiving cable channels with a CATV cable.
Select if you are using a TV antenna.
F or f buttons to highlight one of the following options, then press
Channel Fix is not set.
Select when you want to control all channel selection through a cable
box or VCR. Select the appropriate channel (usually 3 or 4) and use
the cable box's or VCR's remote control for channel selection.
Select from available video inputs when you have connected video
equipment (e.g., a satellite receiver) and you want your TV fixed to it.
Channel Setup
Favorite Channels
Cable : On
Channel Fix: Off
Auto Program
Channel Skip/Add
Channel Label
Move Select
.
to exit.
F f
. Press or to move the cursor to the
Using the Menus
End
to
27