Operating Instructions - Sony WEGA KV-27FS100L Operating Instructions Manual

Operating Instructions

✍
If you lose your remote control, see page 38.
4
Button Description
qs FUNCTION buttons Press to select the equipment (VCR/DVD, SAT/
CABLE, TV) that you want to operate with the
remote control. The indicator (LED) lights up
momentarily when pressed to show which device
the remote control is operating.
qd Press to operate your VCR. The VCR must be
VCR (operating)
programmed into the remote control. For
instructions, see "Programming the Remote
Control" on page 5.
Press the
and
time to record programs with your VCR. The
(to record)
remote control must be programmed before you
can use REC.
m Rewind.
M Fast-forward.
Play.
x Stop.
Pause. Press again to resume normal playback.
X
qf TV/VIDEO Press to cycle through available video inputs.
qg DISPLAY Press once to display the current time (if set) and
the program status such as channel number,
Channel Label (if set), video input, and Video Label
(if set). Press again to turn off the display.
qh MTS/SAP Press to cycle through the Multi-channel TV Sound
(MTS) options: Stereo, Auto SAP (Second Audio
Programming), and Mono.
qj Press to change channels. The channel changes after
and
0 9
two seconds.
ENTER
qk GUIDE Press to display the program guide of your satellite
antenna.
ql Press the arrow buttons to move the cursor in the
on-screen menus. Press the center button to select
an option.
w; Press to display the on-screen menu. Press again to
MENU
exit the menu at any time.
wa CH (channel) Press to change channels. To scan rapidly through the
channels, press and hold down the CH+ or CH- button.
button and the button at the same