How To Enter Characters - Sony RDR-GX300 Operating Instructions (RDR-GX300 DVD Recorder) Operating Instructions Manual

How to Enter Characters

You can label a title, disc, or program by entering
characters. You can enter up to 64 characters for a
title or disc name, but the actual number of
characters displayed in the menus such as the Title
List will vary. When the display for entering
characters appears, follow the steps below.
Number 1 2
buttons, SET
4 5
7 8
0
1
Press </M/m/, to move the cursor to
the right of the screen and select "A"
(upper-case), "a" (lower-case), or
"Symbol," and press ENTER.
The characters of the selected type are
displayed.
2
Press </M/m/, to select the character
you want to enter, and press ENTER.
The selected character appears at the top of
the display.
Example: Input Title Name
Input Title Name
K
1 . , - 1 6
2 A B C 2 Back 7
3 D E F 3 Clear All 8
4 G H I 4 Space 9
5 J K L 5 0
The type of characters will change according
to the language you select in Easy Setup.
Some languages allow you to enter an accent
mark.
3
6
9
</M/m/,,
ENTER
"A"
M N O 6
"a"
P Q R S 7
Symbol
T U V 8
W X Y Z 9 Cancel
0 Finish
To enter a letter with an accent mark, select an
accent followed by the letter.
Example: Select " ` " and then "a" to enter "à."
To insert a space, select "Space."
3
Repeat steps 1 and 2 to enter the
remaining characters.
Input row
Input Title Name
Kids
1 . , - 1
2 A B C 2 Back
3 D E F 3 Clear All
4 G H I 4 Space
5 J K L 5
To erase a character, move the cursor to the
right of the character at the input row. Select
"Back" and press ENTER.
To insert a character, move the cursor to the
right of the point where you want to insert the
character. Select the character and press
ENTER.
To erase all of the characters, select "Clear
All" and press ENTER.
4
Select "Finish," and press ENTER.
To cancel the setting, select "Cancel."
To use the number buttons
You can also use the number buttons to enter
characters.
1
In step 2 above, press the number buttons
repeatedly to select a character.
Example:
Press the number 3 button once to enter "D."
Press the number 3 button three times to enter
"F."
2
Press SET and select the next character.
3
Select "Finish" and press ENTER.
"A"
6 M N O 6
"a"
7 P Q R S 7
Symbol
8 T U V 8
9 W X Y Z 9 Cancel
Finish
0 0
39