Sony RDR-GX300 Operating Instructions (RDR-GX300 DVD Recorder) Operating Instructions Manual page 26

17
Press ENTER.
The Setup Display for the DTS signal appears.
EASY SETUP
DTS
On
Off
18
Select whether or not you wish to send a
DTS signal to your amplifier (receiver),
and press ENTER.
If your AV amplifier (receiver) has a DTS
decoder, select "On." Otherwise, select "Off."
19
Press ENTER when "Finish" appears.
Easy Setup is finished. All connections and
setup operations are complete.
If you use the cable box/satellite receiver
control, check that the control works correctly
(see below).
EASY SETUP
Easy Setup is finished.
To return to the previous step
Press O RETURN.
z Hint
If you want to run Easy Setup again, select "Easy Setup"
in the Setup Display (page 81).
Notes
• If there are only a few channels in your area that carry
time signals, setting the clock automatically may take
up to about 20 minutes after the recorder turns off. If
nothing happens even after you wait about 20 minutes,
set the clock manually in "Clock" of "Settings"
(page 72).
• To record TV programs using the timer, you must set
the clock accurately.
• If you use an S-video cord to connect your cable box or
satellite receiver, set "Line1 Input" or "Line3 Input" in
Video Setup to "S Video" (page 75).
26
Audio Connection 6/6
Finish
Checking the cable box/satellite
receiver control setting
1
Point the remote at the recorder (not at the
cable box/satellite receiver.)
2
Press CH +/– and check that the channel
changes on the cable box/satellite receiver
window.
3
Press the number buttons and check that
the channel changes on the cable box/
satellite receiver window.
To fix the set top box controller to your cable
box/satellite receiver
Once you have confirmed that the set top box
controller controls your cable box or satellite
receiver, fix it in place.
1
Remove the backing on the double-sided tape.
2
Attach it so that the cable mouse is directly
above the remote control sensor on your cable
box/satellite receiver.
If you cannot get the recorder to control your
cable box/satellite receiver
Check the settings at "Set Top Box Control" in
Settings Setup (page 73).
Check the connection and position of the cable
mouse (page 13).
If your cable box or satellite receiver still does not
operate with this recorder, contact your cable
company to see if they can provide you with a
compatible cable box or satellite receiver.