Proper Mounting; Disassembly - Siemens XRS-5 Compact Operating Instructions

Installing/mounting

3.2 Disassembly

3.1.2

Proper mounting

Loss of type of protection
Damage to device if the enclosure is open or not properly closed. The type of protection
specified on the nameplate or in Technical data (Page 37) is no longer guaranteed.
• Make sure that the device is securely closed.
NOTICE
Incorrect mounting
The device can be damaged, destroyed, or its functionality impaired through improper
mounting.
• Before installing ensure there is no visible damage to the device.
• Make sure that process connectors are clean, and suitable gaskets and glands are
• Mount the device using suitable tools. Refer to the information in Technical data
3.2 Disassembly
Incorrect disassembly
The following risks may result from incorrect disassembly:
- Injury through electric shock
- Risk through emerging media when connected to the process
- Risk of explosion in hazardous area
In order to disassemble correctly, observe the following:
• Before starting work, make sure that you have switched off all physical variables such
• If the device contains hazardous media, it must be emptied prior to disassembly. Make
• Secure the remaining connections so that no damage can result if the process is started
16
CAUTION
used.
(Page 37).
WARNING
as pressure, temperature, electricity etc. or that they have a harmless value.
sure that no environmentally hazardous media are released.
unintentionally.
Compact Operating Instructions, 01/2018, A5E43390688_AA
Transducers