Sony DVP-S560D Operating Instructions (DVP-S560D/S565D CD/DVD Player) Operating Instructions Manual page 60

Controlling Your TV or AV Receiver (Amplifier) with the Supplied Remote
Controlling the TV
When you set the TV/DVD switch to TV, you can control
your TV using the buttons below.
TV/DVD
switch
1 2 3
Number
4 5 6
buttons/
7 8 9
0
ENTER
By pressing
You can
?/1
Turn the TV on or off
TV/VIDEO
Switch the TV's input source between
the TV and other input sources
VOL
Adjust the volume of the TV
Number buttons
Select the channel of the TV
and ENTER
Note
Depending on the TV, you may not be able to control your TV or
to use some of the buttons above.
Controlling the AV receiver (amplifier)
1
Slide the TV/DVD switch to DVD.
2
Hold down ?/1, and enter your AV receiver's
manufacturer's code (see the table) using the
number button. Then release ?/1.
Code numbers of controllable AV receivers
(amplifier)
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
AV receiver (amplifier).
TV/DVD switch
1 2
Number
4 5
buttons
7 8
0
60
?/1
TV/VIDEO
VOL
?/1
3
6
9
AV receiver (amplifier)
Manufacturer Code number
Sony 91 (default), 89
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96
Controlling the AV receivers (amplifiers)
When you set the TV/DVD switch to DVD, you can
change the volume of the AV receiver (amplifier) using
VOL.
1 2 3
4 5 6
7 8 9
0
Notes
• Depending on the AV receiver (amplifier), you may not be able
to control your AV receiver (amplifier).
• When you replace the batteries of the remote, the code number
may be reset to the default setting. Reset the appropriate code
number.
TV/DVD switch
VOL