Table of Contents
Advertisement
Quick Links
Instruction Manual
www.winegard.com/pathway
For receivers and programming, call 1-866-593-0348
For up-to-date information on receiver compatibility and programming,
visit www.winegard.com/receivers
For help, email help@winegard.com or call 1-800-788-4417
DO NOT RETURN ANTENNA TO PLACE OF PURCHASE
2452314
Rev7 10-17
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
Advertisement
Table of Contents
Related Manuals for Winegard Pathway X1
Summary of Contents for Winegard Pathway X1
- Page 1 For receivers and programming, call 1-866-593-0348 For up-to-date information on receiver compatibility and programming, visit www.winegard.com/receivers For help, email help@winegard.com or call 1-800-788-4417 DO NOT RETURN ANTENNA TO PLACE OF PURCHASE 2452314 Rev7 10-17 For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
-
Page 2: Compatible Receivers
Compatible Receivers Make sure the Pathway X1 antenna is in a location with a The Pathway X1 antenna must be used with DISH Solo HD ® clear view of the southern sky. receivers. Examples of DISH Solo HD receivers include DISH Wally, 211z, 211k, 211, and 411 receivers. -
Page 3: Installing The Handle
50 feet. Locate the two screws for the handle in the base. Remove the Select a location that will enable the Pathway X1 antenna to screws from the base with a Phillips screwdriver. sit within three degrees of level. The antenna may take longer to lock onto signal if the antenna is not level. - Page 4 Figure 1 Figure 5 If not already activated, the receiver will need to be activated (figure 5). To activate the receiver, call Winegard Company at 1-866-593-0348. The receiver may reboot automatically as part of the update process (figure 6). If so, select the state of your current location on the Mobile Antenna Setup screen as in figures 1 and 2.
- Page 5 Updating Receiver Software Select the state of your current location, and then select “Scan” to begin the search routine (figure 9). For optimal performance, update receiver software occasionally. To allow the software to update, leave the satellite on signal, and press the Power button on the remote or front panel of the receiver;...
- Page 6 Setup for a Secondary Receiver Press “Test Installation 5” to start the Check Switch test (figure 15). After completing the setup on the main receiver, power on the secondary receiver. If using a new receiver, you will be guided through the setup by the Installation Wizard; follow the on-screen steps to complete the setup.
-
Page 7: Maintenance
Before transporting the antenna, disconnect coax cable from the main port. Maintenance The Pathway X1 antenna is designed to be maintenance free. However, it is a good idea to periodically clean the dome with a soft cloth, water, and dish soap For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) -
Page 8: Troubleshooting
If a defect in material or workmanship is discovered, Customer may take the product to an authorized Winegard dealer for service. Customer must provide proof of purchase to verify the product is under warranty. If the product is brought to an authorized Winegard dealer for service prior to expiration of year one (1) of the warranty period and a defect in material or workmanship is verified by Winegard Technical Services, Winegard Company will cover the Winegard dealer’s labor...