Playing A Video Cd - Sony DVP-S3000 Operating Instructions / Mode d’emploi Operating Instructions Manual

Basic Operations Basic Operations

Playing a VIDEO CD

ON/STANDBY indicator
• The operating procedure of DVDs
or CDs is different from that of
VIDEO CDs.
For details on playing a DVD, see
pages 10 to 17.
For details on playing a CD, see
pages 26 to 31.
z
You can turn on the player
using the remote
Press POWER when the
ON/STANDBY indicator on
the front panel is lit in red.
z
After following Step 4
The menu screen may appear
on the TV screen depending
on the VIDEO CD. You can
play the disc interactively,
following the instructions on
the menu screen. (PBC
Playback, see page 21.)
Note
If you don't operate the player or
the remote for more than 30
minutes when a disc is not being
played, the power is automatically
turned off (Auto Power Off
function).
Refer to the instructions
supplied with your disc.
EN
18
2
1
Make settings on your TV.
Turn on the TV and select the video input so that you can view
the pictures from this player.
When using an amplifier
Turn on the amplifier and select the appropriate position so that
you can listen to the sound from this player.
2
Press POWER to turn on the player.
The ON/STANDBY indicator (red) changes to green and the
front panel display lights up.
3
Press §, and place the disc on the disc tray.
With the label side
facing up
4
Press ·.
The disc tray closes and the player starts playback (Continuous
Play). Adjust the volume on the TV or the amplifier.
3 4