Direct frequency tuning
In order to select a station with a known frequency, select the wave band
(AM or FM), press the function control button Q
quency by pressing the corresponding pushbuttons.
Example:
Press any button marked
Press the function control button
Enter frequency by pressing
When tuning a frequency directly, the pushbutton number is not displayed
on the panel. The wave band is indicated by showing "MHz" for FM or
"kHz" for AM.
Note:
All AM stations have allocated frequencies ending with a "0".
All FM stations have allocated frequencies ending with an odd-numbered
digit following the decimal point.
Broadcasters sometimes may not give their exact frequency but the next
closest whole number.
US radio frequency ranges:
AM 540-1600 kHz
FM 88.1-107.9 MHz
52
and then enter the fre
AM 1050 kHz
FM 98.5 MHz
ITT! through Q2I
D
D
Q
Q
EQU Q
Manual tuning
(For fine tuning a station or manual
tuning)
After selecting the desired AM or
FM wave band, press the manual
tuning button
tion frequency) or
through
station frequency).
The frequency will increase or de
crease respectively in increments
0 2 1
Q
U 3
of 0.1 MHz for FM or 1.0 kHz for AM.
Release the button when the
desired station is tuned in.
Please note: It is recommended
that manual tuning operations be
performed by the driver only while
the vehicle is not moving. The driv
er should use the automatic station
seeker/scanner or pushbutton tun
ing when the vehicle is in motion.
Pushbutton tuning
Six FM stations and four AM sta
tions can be stored in memory and
recalled by pressinc^he appropri
ate buttons marked
i M i for FM or
for AM stations.
D
(decreasing sta
(increasing
2 I through
q
through QJJJ