General Information; Generator Ac Lead Connections; Four-Lead, Single-Phase Stator - Generac Power Systems SG30 Owner's Manual

Standby Generator Sets

General Information

GENERATOR AC LEAD CONNECTIONS

FOUR-LEAD, SINGLE-PHASE STATOR

Four-lead generators (see Figure 7.1) are designed to
supply electrical loads with voltage code "A" (240V,
1-phase, 60 Hz). Electrical power is produced in the
stator power windings. These windings were con-
nected at the factory to the main circuit breaker as
shown in Figure 7.1.
The rated voltage between each circuit breaker ter-
minal is 240V. The rated voltage between each circuit
breaker terminal and the neutral point 00 is 120V.
Figure 7.1 — Four-lead, Single-phase Stator
7-1