A.4 Parameter Assignment And Structure Of The Hart Mapping Parameters - Siemens SIMATIC ET 200SP HA Manual

A.4 Parameter assignment and structure of the HART mapping
parameters
Structure of data record 130
Data record 130 has a total length of 20 bytes.
You can use the parameters of data record 130 to configure/map up to 8 HART variables of
the individual channels in the input address space of the I/O module, provided you have
selected configuration with HART variables in the input area, see section Configurations of the
AI 16xI 2-wire HART HA I/O module (Page 13).
Header information
The figure below shows the structure of the header information.
Figure A-4
Parameters
The figure below shows the parameter assignment of the 8 HART variables.
x = 4, 6, 8, 10, ..., 18
Figure A-5
Analog Input Module AI 16xI 2-wire HART HA ( 6DL1134-6TH00-0PH1)
Manual, 11/2017, A5E39408968-AB
Drivers, parameters, diagnostics messages and address space

A.4 Parameter assignment and structure of the HART mapping parameters

Header information of data record 130
Parameters of data record 130
49