Sony DVP-NS3100ES Operating Instructions Manual page 22

Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove plug cap
before connecting.
to coaxial or optical
digital input
[Speakers]
Front (L)
Front (R)
l: Signal flow
z Hint
To realize better surround sound effects, make sure
that your listening position is in between your
speakers.
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT (COAXIAL or OPTICAL)/
HDMI OUT jack.
22
CD/DVD player
2 2
Y
P /C P /C
B B R R
1 1
COMPONENT VIDEO OUT
CONTROL S
S VIDEO VIDEO
IN
OUT OUT
HDMI OUT
Coaxial digital cord
(not supplied)
or
Stereo amplifier (receiver)
DIGITAL OUT AUDIO OUT 5.1CH OUTPUT
PCM/DTS/
CENTER
DOLBY DIGITAL
COAXIAL OPTICAL
L
R
1 2 FRONT REAR WOOFER
Stereo audio cord
(not supplied)
(white)
MD deck/DAT deck
. If the amplifier
B-1
AUDIO OUT
(white)
L L
R
R
(red)
1
to AUDIO OUT L/R
1 or 2
(red)
to audio input
.
B-2
2