Settings For The Display (Screen Setup) - Sony DVP-NC875V Operating Instructions Manual

Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select "SCREEN SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 77).
The default settings are underlined.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
BLACK LEVEL:
BLACK LEVEL
4:3 OUTPUT:
TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
4:3
Select this when you connect a
LETTER
4:3 screen TV. Displays a wide
BOX
picture with bands on the upper
and lower portions of the
screen.
4:3 Select this when you connect a
PAN SCAN
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
4:3 LETTER BOX
4:3 PAN SCAN
16:9
4:3 LETTER BOX
ON
JACKET PICTURE
ON
:
OFF
(COMPONENT OUT)
FULL
Note
Depending on the DVD, "4:3 LETTER BOX" may
be selected automatically instead of "4:3 PAN
SCAN" or vice versa.
SCREEN SAVER
The screen saver image appears when you
leave the player in pause or stop mode for 15
minutes, or when you play a Super Audio CD,
CD, or DATA CD (MP3 audio) for more than
15 minutes. The screen saver will help
prevent your display device from becoming
damaged (ghosting). Press H to turn off the
screen saver.
ON Turns on the screen saver.
OFF Turns off the screen saver.
BACKGROUND
Selects the background color or picture on the
TV screen when the player is in stop mode or
while playing a Super Audio CD, CD or
DATA CD (MP3 audio).
JACKET
The jacket picture (still picture)
PICTURE appears, but only when the
jacket picture is already
recorded on the disc (CD-
EXTRA, etc.). If the disc does
not contain a jacket picture, the
"GRAPHICS" picture appears.
GRAPHICS A preset picture stored in the
player appears.
BLUE The background color is blue.
BLACK
The background color is black.
BLACK LEVEL
Selects the black level (setup level) for the
video signals output from the jacks other than
COMPONENT VIDEO OUT.
ON
Sets the black level of the
output signal to the standard
level.
OFF Lowers the standard black
level. Use this when the picture
becomes too white.
79
,continued