Sony DVP-NC875V Operating Instructions Manual page 26

Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
B-2
COAXIAL
OPTICAL
PCM/DTS/
DOLBY
DIGITAL
DIGITAL
OUT
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
to coaxial or optical digital input
[Speakers]
Front (L)
Front (R)
l: Signal flow
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT jacks.
26
CD/DVD player
COAXIAL CENTER
L
R
OPTICAL R L
FRONT REAR WOOFER AUDIO VIDEO
S VIDEO
PCM/DTS/
DOLBY
5.1CH OUTPUT LINE OUT
DIGITAL
DIGITAL
OUT
Coaxial digital cord
(not supplied)
or
Stereo amplifier (receiver)
Y P P
B R
COMPONENT
OUT VIDEO OUT
or
Stereo audio cord
(not supplied)
(white)
MD deck/DAT deck
B-1
(red)
R
AUDIO
(white)
LINE OUT
to LINE OUT L/R (AUDIO)
(red)
to audio input
. If the amplifier
.
B-2
B-1
L
VIDEO