Table of Contents
Advertisement
Playing a Disc (continued)
NOTES:
• Place a disc with the playback side down on the
spindle, and push gently on the center of the disc
so it goes into position.
• Confirm LCD MODE position by pressing LCD
MODE button.
• If no picture appears on the LCD, check that the
LINE SELECT switch is set to LINE OUT mode.
• If parental control is set and the disc is not within
the rating settings you must input the password.
(See "Lock Menu" on page 46-47.)
• DVDs may have a region code. Your player does
not play discs that have a region code different
from your player.
Adjusting the brightness and color intensity
Use the COLOR/BRIGHT button to adjusting the
brightness and color intensity.
Each time you press the button, the adjustment
mode changes as follows.
Brightness
Color
Adjusting the brightness
Select "Brightness" and then press
brightness.
b ; dark
B ; light
Adjusting color intensity
Select "Color" and then press
intensity.
b ; lighter colors
B ; darker colors
NOTES:
•
This COLOR/BRIGHT button adjusts only the image on
the LCD screen.
•
Power consumption increases with the level of
brightness.
OFF
25
B/b
to adjust the
B/b
to adjust the color
Advertisement
Table of Contents
