Table of Contents
Advertisement
4.6. Colours
Sony DADC uses the Pantone Matching System
(PMS).
Please mark each label film with the Pantone colour
number requested by you. Please select your colour
from the Pantone Colour Selector 1000, except for
double impression (2x) colours.
When using Pantone colours 801 to 814, preprint-
ing should be carried out with white colour in order
to achieve the luminescent effect similar to the
Pantone Colour Selector 1000.
When producing your films please mind that a base
of polycarbonate with reflecting aluminium coating
is printed and therefore there may be colour deviat-
ions compared to printing on paper.
To provide (as much as possible) a compliance of
the colours of printwork (e.g. booklets) with the
DVD label printing, we advise to preprint a full
white base on the DVD.
4.7. Label Film Data on
Electronic Storage Media
Sony DADC employs a Graphics Studio with the
following standard DTP (Desktop Publishing)
equipment:
HARDWARE
Apple MAC G3
Laser imager AGFA AccuSet 1000 with
Software Taipan RIP(resolutions up to 2400 dpi)
Laser imager AGFA Avantra 25 with Software
Taipan RIP (resolutions up to 3600 dpi)
3M Desktop Colour Proofing System
Drum scanner "Chromagraph S3300"
(resolution up to 14000 dpi)
SOFTWARE
recommended software
Quark X-Press
Aldus Freehand
Adobe Illustrator
Adobe Photoshop
Apple Macintosh Data
If your label films are produced on an Apple
Macintosh system you may transmit your designs to
accepted software
Aldus Pagemaker
Corel Draw (DOS)
Colours/Label Film Data
us on electronic storage media for film burn-out.
DOS Data (Corel Draw)
If you have edited your designs under DOS, please
send us a placeable EPS file in which the text is
converted into curves and the image identification
set is switched on.
If you have used Corel Draw please send us the
CDR file.
Other hardware and software
If you operate another software or hardware format
please contact our Graphics Studio (tel. +43/62
46/880-448)
The following storage media can be accepted:
ZIP disk, JAZ disk and CD-R
3.5" floppy disk in Mac or DOS format
44/88/200 MB cartridge /5.25") in Mac format
270 MB cartridge (3.5") in Mac format
MO disk 230 MB (3.5") in Mac format
Please do not forget:
Laser printout: Attach a print-out of a
laser printer to your documents.
Fonts: Indicate manufacturer and all
display settings, if necessary enclose
screen and printer fonts.
TIFF and EPS files: All graphic files (logos,
company logos etc.) have to be supplied
in all cases.
Changes: Beware of the major resolution
of the laser imager with fine lines,
outlines and half tones. In general these
become thinner.
Marking: Your floppy or cartridge should
be marked to provide clear identification.
Liability: We do not assume liability for
incomplete or defective files. Only submit
copies you have checked and stored
carefully.
DTP-labelfilm template DISC
All labelfilm templates can be downloaded as
QuarkXpress file from our website:
http://www.sonydadc.com. Upon request we will
provide a 3.5" disk with all DVD logos and the
copies of all label film specifications and printwork
specifications used by us as Tiff or EPS and/or
QuarkXPress files, respectively. Please contact our
Customer Service department in this respect.
17
Advertisement
Table of Contents
