Rear View Monitor System - Toyota Corolla iM 207 Quick Reference Manual

FEATURES & OPERATIONS

Rear view monitor system

The rear view monitor system assists the driver by displaying an image of the camera's
view behind the vehicle when in reverse.
To see the camera's image of the view behind the vehicle on the monitor screen, the
vehicle ignition switch must be in the ON position and the gear selector must be in the
REVERSE position.
If you shift the vehicle out of the "R" position, the screen returns to the previous
image.
The rear view monitor system is a device intended to supplement the driver when
motoring in reverse and should not be relied upon solely. Drivers should check
behind the vehicle before entering and are reminded to use the rear view and side
mirrors once seated to ensure the intended path is clear before moving the vehicle.
AREA DISPLAYED ON SCREEN
The image displayed on the screen is an approximation only.
INFORMATION
If the camera lens becomes dirty, it cannot transmit a clear image. If water droplets,
snow or mud adhere to the lens, rinse with water and wipe with a soft clean cloth. If the
lens is extremely dirty, wash it with a mild cleaner and rinse immediately.
INFORMATION
The area displayed on the screen may vary
according to vehicle orientation or road
conditions.
The area detected by the camera is limited.
The camera does not detect objects which
are close to either corner of the bumper or
under the bumper.
16