Basic Operations; Playing Discs - Sony 3-283-028-11(1) Operating Instructions Manual

Basic Operations

Playing Discs

"/1
A
Disc tray
Z
/
X
Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
1
Turn on your TV.
2
Switch the input selector on the TV to
this system.
3
Press "/1.
The system turns on.
Unless the system is set to "DVD," press
FUNCTION to select "DVD."
4
Press A.
18
GB
Adjust the
volume
H FUNCTION
"/1
FUNCTION
MUTING
VOLUME +/–
./>
H
x
5
Load a disc.
Place one disc on the tray, and then press A.
Note
• When you play an 8 cm disc, place it on the
inner circle of the tray. Be careful that the disc is
not skewed on the inner circle of the tray.
• Do not forcibly press the disc tray closed with
your finger, as this may cause malfunction.
• Do not place more than one disc on the tray.
6
Press H.
The system starts playback (continuous
play).
Adjust the volume on the unit.
The volume level appears on the TV screen
and in the front panel display.
Note
• Depending on the system status, the volume level
may not appear on the TV screen.
To save the power in standby
mode
Press "/1 while the system turns on. To cancel
standby mode, press "/1 once.
Additional operations
To
Stop
Pause
Resume play after pause
Go to the next chapter,
track, or scene
Go back to the preceding
chapter, track, or scene
Turn off the sound
temporarily
Press
x
X
X or H
> (except for JPEG)
. (except for JPEG)
MUTING. To cancel,
press it again or
VOLUME + to adjust
the sound volume.