Advertisement
5 Carefully shake off excess water and let
all parts air dry completely.
Never dry the trimmer teeth with a
towel or tissue, as this may damage the
trimmer teeth.
6 After cleaning, reattach the guard to the
product.
Every 3 months: cleaning trimming head
connector
1 Switch off the product and disconnect it
from the power outlet.
2 Remove the guard (Fig. 11).
3 Pull the trimming head off the product
(Fig. 23).
4 Clean the trimming head connector and
hair chamber with the cleaning brush
and/or rinse it under the tap (Fig. 24).
5 Clean the inside of the trimming head
with the cleaning brush and/or rinse it
under the tap (Fig. 25).
6 Carefully shake off excess water and let
all parts air dry completely.
7 Press the trimming head back onto the
product, making sure that the projection
on the back of the trimming head fits
exactly onto the notch in the hair
chamber (Fig. 26).
This product has no other user-serviceable
parts. For assistance call 1-800-243-3050.
Storage
- Be sure the product is switched off.
Remove the cord from the outlet and the
product before storing it in a safe, dry
location where it will not be crushed,
banged, or subject to damage.
- Do not wrap cord around the product
when storing.
- Store cord and other accessories in a
safe location where these will not be cut
or damaged.
- Do not place or store the product where
it can fall or be pulled into a tub or sink,
water or other liquid while plugged in.
Assistance
For assistance, visit our website:
www.philips.com/support or call toll free
1-800-243-3050.
Online information is available 24 hours a
day, 7 days a week.
Disposal
- This product contains a rechargeable
lithium-ion battery which must be
disposed of properly.
- Contact your local town or city officials
for battery disposal information. You can
also call 1-800-822-8837 or visit
www.call2recycle.org for battery drop-
off locations (Fig. 27).
- For assistance, visit our website
www.philips.com/support or call
1-800-243-3050 toll free.
- Your product is designed and
manufactured with high quality materials
and components, which can be recycled
and reused. For recycling information,
please contact your local waste
management facilities or visit
www.recycle.philips.com.
Full Two-Year Warranty
Philips North America LLC warrants this new
product (except cutters and guards) against
defects in materials or workmanship for a
period of two years from the date of
purchase, and agrees to repair or replace
any defective product without charge.
IMPORTANT: This warranty does not cover
damage resulting from accident, misuse or
abuse, lack of reasonable care, the affixing
of any attachment not provided with the
product or loss of parts or subjecting the
product to any but the specified voltage or
batteries.*
NO RESPONSIBILITY IS ASSUMED FOR
ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
In order to obtain warranty service, simply
go to www.philips.com/support for
assistance. It is suggested that for your
protection you return shipments of product
by insured mail, insurance prepaid. Damage
occurring during shipment is not covered by
this warranty.
NOTE: No other warranty, written or oral, is
authorized by Philips North America LLC.
Advertisement
