Troubleshooting - Samsung SDC-415 SERIES Instruction Manual

Troubleshooting

If there are problems in operation, please refer to the items below. If the
problem persists, please contact the agent you purchased this product from.
Problems
Nothing appears on the • Please check the power connection.
screen.
• Please check the video signal line connection.
• Please check and make sure that the auto lens
switch is set to DC (VIDEO) when using a DC
(VIDEO) lens.
• Please check the Brightness of Auto Iris lens.
• Please check if the lens is clean.
The video image is not
Please clean the lens with a clean cloth or brush.
clear.
• Please adjust the contrast feature of the monitor.
• Please make sure that the screen is not exposed
directly to a bright light.
Please move the camera if necessary.
• Please readjust the back focus of the camera.
• Please adjust the contrast feature of the monitor.
The screen is dark.
• If you have an intermediate device, set the 75Ω/
Hi-z properly, and check the terminals. (refer to
page 18)
• Please check if an auto iris lens is being used
and adjust the brightness level.
• Please check if an appropriate power source to
There is a problem with
the camera complies with the manufacturer's
the camera operation.
standard requirement, or if the voltage keeps
The camera surface is
changing.
too hot and black stripes
appear on the screen.
36
COLOR CCD CAMERA
Troubleshooting
User's Manual
Problems
The MOTION • Please check if 'MOTION DETECTION' mode is
DETECTION function is turned on.
not working.
• Please check if the MD LEVEL is too low.
• Please check the setting of the MD AREA.
• Please check the 'WHITE BAL' setting. (Please
Colors are not quite
right. refer to page 25)
• Please check if the camera is facing directly into
The screen is
sunlight or fluorescent light.
flickering.
• Please check if an auto iris lens is being used.
• Please check the connection of the lens
connector cable.
L/L mode isn't able to • Have you connected your camera to DC power
be selected. source? Connect it to AC power source.
L/L mode is not • Please check the frequency of power supply
available. (60Hz for NTSC, 50Hz for PAL).
COLOR (DAY & NIGHT) • Please check if the AGC menu is set to the OFF
mode is not working. position.
SENS-UP function is not • Please check if the AGC menu is set to the OFF
working. position.
• Please check if the SHUTTER menu is set to
MANUAL mode.
• Please check the limit of Sens-UP AUTO mode.
37
COLOR CCD CAMERA
Troubleshooting
User's Manual