Setting The Volume - Sony VAIO PCGA-UVC10 Operating Instructions Manual

Setting the volume

Note
Names and screens displayed may differ depending on the operating system you are
using.
1
Double-click on
system) in the taskbar at the bottom of the screen.
The "Volume Control" appears.
2
Click the "Options" menu, and select "Properties" (or
"Options", depending on the operating system you are
using).
The "Properties" screen appears.
3
Select "Sony PCGA-UVC10" in the Mixer device text box,
and click "OK".
The "Capture" screen appears.
z
If the "Capture" screen does not appear, the driver may not be properly installed.
See "Checking That the Driver is Installed" (page 10), and check whether the driver
is properly installed.
4
Check that audio input from the microphone is enabled.
Check that the "Mute all" checkbox is not selected. If it is selected,
click the checkbox to deselect it.
5
Adjust the volume of microphone input.
Move the slider for the controller in Step 4 to adjust the volume.
Make a video or audio recording using your software. If the audio plays
back correctly, the settings are complete.
Hint
( depending on your operating
GB
17