Specification - Sealey ROADSTART PBI2212GS Manual

INTRODUCTION
Manufactured with professional grade, high performance AGM battery, produced in the USA and
specially formulated to jump start vehicles. The only range of DEKRA approved emergency jump
starters on the market. Supplied with automatic maintenance charger that features patented
microprocessor controlled speed charging, with thermal runaway protection. This means that unlike
other booster packs, the unit can be left safely on charge continuously, ensuring it is always ready for
use. Fitted with an isolating rotary on/off switch and features a two-function digital display showing
the internal battery level and the vehicle battery voltage. Fitted with a 12V accessory socket and a
single 2.1A USB port ideal for charging mobile phones or tablets. A fusible link integrated in the
output cable provides surge and spike protection, preventing damage to delicate and sophisticated
vehicle electronics, as well as the booster. The heavy-duty clamps are manufactured with a braided
link between each jaw for maximum power transmission, whilst also being curved allowing easy
access to awkward or hard-to-reach battery terminals. Easy cable and clamp storage ensure the unit
is compact and tidy when not in use. Audible warning system (AWS) to advise operator if the unit has
been turned on for too long without being connected to a battery and for reverse polarity.

SPECIFICATION

Model no.
Starting current
Peak amps
Voltage
Auxillary output
USB output
Cable and clamp length
Weight
PBI2212GS
900A
2300A
12V
12V
2.1A
1.6m
9.5kg
2
PBI4424GS
1800/900A
4600A (12V) / 2300A (24V)
12 & 24V
12V
2.1A
1.7m
17.5kg