Siemens SITOP UPS1600 under STEP 7 V12 Getting Started page 32

Parameterizing the SITOP UPS1600
6.2 Switching off the UPS when the power fails by a user program
Integrating the library into the program
1. Open the project into which function block FB160 should be inserted, and change into the
2. Under global libraries, open the folder "UPS1600 library TIA Portal V12 SP1 > Copy
32
project view.
templates > UPS1600 function blocks (TIA V12)" and depending on the S7 IO controller
being used, select the appropriate function block folder:
– IO controller S7-300/400: "STEP 7 function blocks (S7-300/400)"
– IO controller S7-1200/1500: "STEP 7 function blocks (S7-1200/1500)"
SITOP UPS1600 under STEP 7 V12
Getting Started,