Using The Self-Timer; Selecting A Flash Mode - Sony CD Mavica MVC-CD500 Operating Instructions Manual

Using the self-timer

60
min 101
5.0M
96
M AF
1
, Turn the mode dial to
press V ( ) on the control
button.
The (self-timer) indicator appears on the
LCD screen.
• If the menu is currently displayed, press MENU
first so that the menu disappears.
• You can also carry out this operation when the
mode dial is set to P, S, A, M, SCN or
2
, and , Center the subject in the frame,
and press the shutter button
fully down.
The self-timer lamp (page 9) flashes and a
beep sounds after you press the shutter
button until the shutter operates
(approximately 10 seconds).
To cancel the self-timer in the middle
.
of the operation
Press V ( ) on the control button again.
The indicator disappears from the LCD
screen.
• If you press the shutter button while standing in
front of the camera, the focus and the exposure
may not be correctly set.

Selecting a flash mode

60 FINE
min
101
5.0M
96
M AF
0EV
F2.8
30
, Set the mode dial to
Each time you press
changes as follows.
60
min 101
5.0M
96
M AF
, and
press v ( ) on the control
button repeatedly to select a
flash mode.
v
( ), the indicator
27