Getting Started; Charging The Battery Pack - Sony CD Mavica MVC-CD500 Operating Instructions Manual

Charging the battery pack

1
, Open the battery cover.
Slide the cover in the direction of the arrow.
• Be sure to turn off your camera when
charging the battery pack (page 15).
• Your camera operates only with the
"InfoLITHIUM" NP-FM50 battery pack (M
series) (supplied) (page 121).

Getting started

2
Battery eject lever
, Install the battery pack, then
close the battery cover.
Insert the battery pack with the b mark
facing toward the battery compartment as
illustrated.
Make sure the battery pack is firmly
inserted all the way, then close the cover.
• The battery pack is easily inserted by pushing
the battery eject lever at the front of the battery
compartment up.
DC IN jack cover
3
AC Adaptor
, Open the DC IN jack cover and
connect the AC Adaptor
(supplied) to the DC IN jack of
your camera.
Connect the DC plug with the v mark
facing up.
• Do not short the DC plug of the AC Adaptor
with a metallic object, as this may cause
malfunction.
• Clean the DC plug of the AC Adaptor with a
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.
DC plug
11