Turning On/Off Your Camera; How To Use The Control Button - Sony CD Mavica MVC-CD500 Operating Instructions Manual

Turning on/off your camera

POWER lamp
, Slide the POWER switch in the
direction of the arrow.
The POWER lamp (green) lights up and the
power is on. When you turn on your camera
for the first time, the Clock Set screen
appears (page 16).
Turning off the power
Slide the POWER switch in the direction of
the arrow again. The POWER lamp goes
out, and the camera turns off.
• Do not remove the battery pack or the
AC Adaptor with the lens portion
extended, as this may cause
malfunction.
• If you turn on the power when the mode dial is
set to , P, S, A, M, SCN or
portion moves. Do not touch the lens portion
while it is operating.
Auto power-off function
If you do not operate the camera for about
three minutes during shooting or viewing or
when performing SET UP, the camera turns
off automatically to prevent wearing down
the battery. The auto power-off function
POWER
only operates when the camera is operating
switch
using a battery pack. The auto power-off
function also will not operate in the
following circumstances.
• When viewing movies
• When a connector is plugged into the
(USB) jack or the A/V OUT (MONO)
jack.
, the lens
How to use the
control button
Spot
Center
Multi
Metering Mode WB WB ISO
400
200
100
Auto
WB ISO
To change the current settings of the
camera, bring up the menu or the SET UP
screen (page 41), and use the control button
to make the changes.
For each item, press v/V/b/B to select the
desired value, then press the center z or
v/V/b/B to make the setting.
Mode
Mode
15