3: Setting The Date And Time - Sony Mavica MVC-FD71 Operating Instructions Manual

About the power source
This camera can be powered from the following two power sources:
•Sony InfoLithium battery* NP-F330 (supplied)/F530 (not
supplied)/F550 (not supplied)
•AC power adopter AC-V700 (not supplied)
When you use the camera for a long time, we recommend you to
power the camera from a wall outlet with the AC power adaptor.
* "InfoLITHIUM" battery pack
The "InfoLITHIUM" is a lithium ion battery pack which can exchange data
with compatible equipment about its battery consumption.
"InfoLITHIUM" is a trademark of Sony Corporation.
Setting the date and time
When you use the camera first, set the date and time.
The date and time data are necessary for MS-DOS format recording.
If they are not set, incorrect date and time are recorded, and CLOCK
SET screen in step
CAMERA mode.
1
Slide POWER down to turn on the power.
2
Select "CLOCK SET" in MENU with the control button,
then press it.
+ EV
–EV
MENU
3
appears whenever you turn on the camera in
÷
CLOCK SET
BEEP
DISK TOOL
FILE NUMBER
FLASH LEVEL
QUALITY
REC MODE
120min
13-EN