Sony DXC-390 Instructions For Use Manual page 19

IRIS
Appears when you set LENS to REMOTE.
Selects how to adjust the iris. You can select AUTO or
MANUAL.
AUTO: Adjusts the iris automatically.
MANUAL: Adjusts the iris with the IRIS control on the
RM-C950 remote control unit.
Function
Selection
Sets auto exposure focusing point in the range from
AE LEVEL
–127 to +127.
AE AREA Sets the AE (Auto Exposure) window when the
camera is set to AGC, CCD IRIS or auto-iris control
mode.
MULTI: Divides the screen into 9 sections and
adjusts auto exposure according to the
luminance level in each section. Normally set to
this position.
LARGE, MID, SPOT and SLIT: Displays the
following AE windows and adjusts auto exposure
according to the luminance level in each area.
Selection
AE AREA
(Continued)
LARGE
MID
SLIT
SPOT
Function
MANUAL: Sets the AE window with the desired size
and position on the screen.
Follow the steps below.
1 Select MANUAL and press the ENTER button.
Cross
cursor
Set Top-Left Point
Move Cross Cursor
Cancel Next
MENU ENTER
2 Move the cross cursor appearing at the left top
B b V v
corner with the , , or
upper and left side size, then press the ENTER
button.
Set Bottom-Right Point
Move Cross Cursor
Cancel Next Back
MENU ENTER BARS
Chapter 2 Operation
button to set the
Cross
cursor
(Continued)
19
(GB)