4.11
Routing
The Routing part includes default gateway and static route.
4.11.1
Default gateway
Default gateway interface list can contain multiple WAN interfaces serving as system default
gateways.
Choose Advanced Setup > Routing > Default Gateway to enter the configuration page.
Selected Default Gateway Interfaces: It specifies the current effective default IPv4 gateway
interface. If there are many interfaces in the list, the first one always takes effect.
Select a WAN interface and click the
box.
Available Routed WAN Interfaces:
WAN interface and click the
Selected WAN Interface: Select the current IPv6 gateway interface in effect from the drop-down list.
4.11.2
Static route
4.11.2.1
Overview
Static Route is used to select the best route for delivering data from a source address to a
destination address. A static route is a manually configured route, which is simple, efficient, and
button to move it to the Available Routed WAN Interfaces
It Specifies the current alternative default IPv4 gateway interface. Select a
Selected Default Gateway Interfaces
button to add it to the
136
box.