Viewing An Image On A Standard Definition Sd) Tv - Sony DSC-TX5 Cyber-shot&reg Handbook

Viewing an image on a Standard
Definition (SD) TV
You can view images recorded on the camera in standard picture quality by connecting the
camera to a Standard Definition (SD) TV. Refer also to the operating instructions supplied with
the TV.
1 Turn off both the camera and the TV.
2 First, open the battery/memory card cover, then open the multi-connector
cover.
3 Connect the camera to the TV with the cable for multi-use terminal
(supplied).
1 To audio/video input jacks
4 Turn on the TV and set the input.
5 Press (Playback) button to turn on the camera.
Images shot with the camera appear on the TV. Touch
this camera to select the desired image.
Notes
• When using the camera abroad, it may be necessary to switch the video signal output to match that of
your TV system (page 101).
• When you play back a single image, no icons are displayed on the TV.
• You cannot play back images in [Easy Mode] during TV output.
• When you shoot movies while the camera and a TV are connected, the image being shot is not displayed
on the TV.
• When you disconnect the cable for multi-use terminal and close the cover of the camera, first close the
multi-connector cover, then close the battery/memory card cover.
Cable for multi-use terminal
(Playback) button
2 To the multi-connector
/ displayed on the LCD screen of
117 GB