Charging The Battery Pack - Sony Cyber-Shot DSC-S30 Operating Instructions Manual

Charging the battery pack

You cannot charge the battery pack while your camera is turned on. Be sure to turn
off your camera before charging.
1
Insert the battery pack into your camera.
2
Open the DC IN jack cover and connect the DC connecting cable to
the DC IN jack of your camera with the v mark facing up.
3
Connect the power cord (mains lead) to the AC power adaptor and
then to a wall outlet (mains).
The BATT CHARGE lamp lights orange when charging begins. When the
BATT CHARGE lamp goes off, normal charge is completed. For full
charge, which allows you to use the battery longer than usual, leave the
battery pack inserted for about one hour after normal charge is completed.
Battery remaining indicator
The LCD screen on the camera shows the remaining time for which you can still
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
Auto power-off function
If you do not operate the camera for about three minutes during recording, the camera
turns off automatically to prevent wearing down the battery. To use the camera again,
slide down the POWER switch to turn on the camera again.
BATT CHARGE lamp
DC IN jack cover
AC-L10
AC power adaptor
Battery pack (M series)
To the wall outlet (mains)
Power cord
(mains lead)
9