Inserting the "Memory Stick"
1
Open the battery/"Memory Stick" cover.
Open the cover while sliding the OPEN switch in the direction of the arrow.
2
Insert the "Memory Stick."
Insert the "Memory Stick" with the B mark facing toward the battery
compartment as illustrated until it clicks.
3
Close the battery/"Memory Stick" cover.
Removing the "Memory Stick"
Open the battery/"Memory Stick" cover, then press the "Memory Stick" once lightly.
Notes
• Insert the "Memory Stick" firmly until it clicks, otherwise a message such as "MEMORY
STICK ERROR" will be displayed.
• Never remove the "Memory Stick" or turn off the power while the access lamp is lit up.
• You cannot record or edit images on a "Memory Stick" if the erasure prevention switch is set to
the LOCK position.
Erasure prevention switch
Access lamp
Connector
OC
Label space
15