Still Image Printing; Connecting To A Pictbridge Compliant Printer - Sony Cyber-Shot DSC-F88 Operating Instructions Manual

Connecting to a
PictBridge compliant
printer
Even if you do not have a computer, you
can easily print images shot using your
camera by connecting the camera to a
PictBridge compliant printer. For
preparation, you only need to select the
USB connection in the SET UP settings and
connect the camera to the printer
multi cable
USB .
Using a PictBridge compliant printer allows
you to easily print the Index prints*.
* An Index print function may not be provided
depending on the printer.
• When printing images, we recommend that you
use the fully charged battery pack or AC
Adaptor to prevent the camera turning off.
Preparing the camera
Set the USB mode on the camera to connect
the camera with a printer.
using a
Control button
a Set the mode dial to SET UP
b Select
2
select [USB Connect] with
B/v/V.
c Select [PictBridge] with B/v,
then press z.
Setup 2
File Number:
USB Connect:
Video Out:
1
Clock Set:
2
The USB mode is set.
Mode dial
.
(Setup 2) with V, then
PictBridge
PTP
Normal
Still image printing (PictBridge printer)
Connecting the camera to
the printer
multi connector
Connect the
and the USB connector on the printer using
a USB multi cable, and turn on the camera
and the printer.
The camera turns to playback mode
regardless of the mode dial position and an
image in the selected playback folder is
displayed on the LCD screen.
After the connection
is made, the
mark is indicated on
the LCD screen.
1M
2 9
101 /
101-0002 2005 1 1 10:30
AM
BACK/NEXT VOLUME
Printer
on the camera
73