Service - Sony DSC-F707 / 717 User Manual

salt deposits that may have built up. No chemical cleaners should be used. Mild
detergents e.g. shampoo and soap based cleaners are permitted.
Important, Polycarbonate may be harmed by some household chemicals, the housing
should never be exposed to the following classes of chemicals:
benzene, toluene, xylene, chlorinated hydrocarbons, methanol, any other solvents,
strong acids and bases.
For long term storage please remove the main body to lid O-ring.
Transportation. When transporting by air, please ensure the housing is not sealed,
to allow the air pressure to equalize. Either remove the O-ring (recommended), or
open the pressure release port (a spacer is provided to keep the pressure plug in the
open position, please make sure there is no bending of the plug while open).
Please protect the housing during transportation. It is recommended to remove the
handle, and shutter extension, and wrap the camera in foam or bubble wrap.
Accidents. The impact resistance of the housing is excellent. However after an
accident the alignment of the housing may have been damaged. Therefore in the
event of your housing suffering an impact force, e.g. being dropped, it is essential
you do not use the housing for diving. Please return the housing immediately for
service. Please put a note inside to indicate the nature of the accident, so that we can
assess the severity.

5. Service

To ensure the continued performance of your housing, it should be serviced every
year, or after every 200 dives. Please note the terms for servicing the housing posted
at our website. A full service will include:
Inspection of all components for wear or damage (report if repair necessary)
Cleaning of all sealing surfaces, and replacement of all O-ring seals.
Hydrostatic pressure test to 10 Bar.
Note: the replacement of damaged components (except replacement O-rings) may
require additional cost.
7 5/7/2005