Advertisement
PHASE 2 – INSTALLATION
2.1 TIPS ON HOW TO ATTACH A PLUSNUT
2.1.1 Attach the plusnut using the plusnut gun.
TIPS: Put the plusnut on the plusnut gun, then attach the plusnut in the hole by turning the gun forward until the
plusnut locks, then remove the gun by turning in reverse.
FORWARD
2.1.2 Attach the plusnut using the 6490 plusnut tool.
NOTE: The hardware used for the 6490 plusnut tool is not included in the fastener bag.
The 6490 plusnut tool can be ordered separately upon demand at no charge.
6490
TIPS STEP 1:
Assemble the 6490 plusnut tool with the hardware needed,
plusnut and the 9/16" wrench as shown.
For technical support, contact us at 1-800-565-5321
REVERSE
HARDWARE USED
Flat washer 1/4"
Flat washer 1/4" BS × 3/4" OD
TOOLS
q Cordless Impact
q 7/16" Socket
q 9/16" Wrench
TIPS STEP 2:
Attach the plusnut in the hole by turning
the bolt forward using an impact with a
7/16" socket until the plusnut locks, then
remove the bolt by turning the impact in
reverse.
FORWARD
REVERSE
3068-DL Installation Guide | REV. D2 | Page 6
Advertisement
