Disconnect the cable for multi-use terminal (DSC-W50) or the USB cable (DSC-W30/W40),
•
and connect it again. If an error message is indicated on the printer, refer to the operating
instructions supplied with the printer.
Cannot print images.
Check the cable for multi-use terminal (DSC-W50) or the USB cable (DSC-W30/W40) is
•
connected correctly.
Turn on the printer. For further information, refer to the operating instructions supplied with
•
the printer.
If you select [Exit] during printing, images may not print. Disconnect and connect the cable
•
for multi-use terminal (DSC-W50) or the USB cable (DSC-W30/W40) again. If you still
cannot print your images, disconnect the cable, turn the printer off and then on, then connect
the cable again.
Movies cannot be printed.
•
Images shot using cameras other than this camera or images modified with a computer may
•
not be printed.
Printing is canceled.
You disconnected the cable for multi-use terminal (DSC-W50) or the USB cable (DSC-W30/
•
W40) before the
Cannot insert the date or print images in the index mode.
The printer does not provide these functions. Consult the printer manufacturer as to whether
•
the printer provides these functions or not.
The date may not be inserted in the index mode depending on the printer. Consult the printer
•
manufacturer.
"---- -- --" is printed on the date-inserted part of the image.
Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
•
to [Off] and print the image again (page 75).
Cannot select the print size.
Consult the printer manufacturer as to whether the printer can provide the desired size.
•
Cannot print the image at the size selected.
If you have changed the paper size after having the cable for multi-use terminal (DSC-W50)
•
or the USB cable (DSC-W30/W40) connected, then connect the printer again.
The print setting of the camera differs from that of the printer. Change the setting of either the
•
camera (page 75) or the printer.
Cannot operate the camera after canceling printing.
Wait for a while as the printer is carrying out the cancellation. It may take some time
•
depending on the printer.
90
(PictBridge Connecting) mark disappears.